Axiohm APOS PRINTER SERIES Manuel d'utilisateur télécharger pdf (Page 21)

APOS KANJI User Manual Page 21 / 45

Ref : 3103039-FDE Issue A

4.1.3. ESC v

(Description) Send printer status byte

(Format) <1Bh> <76h>

(Comments) The printer will transmit a single byte which reflects the status of the printer in

accordance with the table below.

This command is ignored if the printer is fitted with a Centronics interface

because Centronics is not bi-directional.

(Cross reference) –

Bit Function bit = 0 bit = 1

0 (unused) - -

1 Door open Close Open

2 Paper Present Out

3 (unused) - -

4 (unused) - -

5 (unused) - -

6 (unused) - -

7 Cutter failure No Yes

4.1.4. AX V

(Description) Send printer software version

(Format) <1Dh> <56h>

(Comments) The printer returns 4 characters representing the software version

eg. “01.0” for Version 1.0

(Cross reference) –

4.1.5. ESC @

(Description) Initialize printer

(Format) <1Bh> <40h>

(Comments) Clears data in the buffer and initializes the printer settings.

(Cross reference) –

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 44 45

Pas de commentaire

Axiohm APOS PRINTER SERIES Manuel d'utilisateur Page 21